A Blog by WARM Training Center
residents
Escape the offgassing vinyl!
Nov 16th
I’ve got a bunch of vinyl sheet products stored in my office that are off-gassing badly. We’re in a small, poorly ventilated room but I’m not sure we can find alternative closet space. Do you have 1) Any idea of how unhealthy this is (the smell is overpowering in the morning) and 2) Any suggestions beyond fans or alternative storage space to mitigate?
— J in Detroit
Yikes! Options are limited. Here are my recommended three steps for dealing with this (I’ll cover how unhealthy it is further below):
- Write the supplier and see if they can use a PEVA, EVA or PVB plastic instead of PVC vinyl. PEVA, for example, is low odor, much less toxic and still inexpensive. Note that “vinyl” often refers to PVC -especially if it’s stinky. But there are other forms of vinyl (like PEVA or PVB) which aren’t nearly as noxious. Here’s a nice overview of the different vinyls.
- Heat and humidity make PVC outgas faster. SO, if you can temporarily store them somewhere else that is hot and humid (like a boiler room – preferably ventilated), that’ll help them offgas faster. Alternately, keeping your office dry and cool will help keep them from offgassing as much in your space.
Add plants. There is decent evidence to suggest that specific houseplants remove common VOCs from the air in buildings. Studies by NASA, University of Georgia and others support the idea, while the EPA remains skeptical. However, I’m now talking with the EPA about this since their skepticism seems largely disproven by this recent study from University of Technology, Sydney. But that last link goes to the actual scientific study for the geeks out there. For the rest of you, here’s a nice overview of that research’s results and specific plant recommendation. In your case, I’d say this may be one of your best bets – but be sure to avoid plastic pots or pesticide-laden plants as they may introduce their own VOCs.
Let me know if it works!
Oh – and as for how bad is it? Well, we’re surrounded by toxins and any single source like this won’t kill you. However, a recent study on PVC shower curtains found:
The level of Total VOCs measured was over 16 times greater than the recommended guidelines for indoor air quality established by the U.S. Green Building Council and Washington State Indoor Air Quality Program.
So it’s safe to assume that if you’re smelling that much stink, then it’s certainly worth addressing. Meanwhile some of these VOCs are considered hazardous air pollutants by the EPA and are suspected carcinogens.
The future of Cities
Sep 13th
I’m on a panel with Joachim Mitchell of Terreform Tuesday, Sept. 13 at Lawrence Tech University. Mitchell has some sci-fi-esque notions about future urban design — yet swears it’s all with current day technologies. His focus is NYC, but we know that Detroit’s a different creature with lots of room for redefining the American City. What would a Terreform approach look like in D-town? Should be a fun discussion.
Of course, I’ll be focusing on the human and social interface — new exciting technologies or no will still account for and integrate with real people to succeed.
Check out these images:


Detroit-folks might particularly appreciate their strong transportation focus and ideas:

Solar Hot Water Update
Aug 17th
I have been doing some research lately into Solar Hot Water heating systems and I wanted to post some of the information that have learned. Two people who I spoke with who were extremely helpful were Christina Snyder at the Clean Energy Coalition (888.818.0987 x707) and Tony at Renewable Energy Solutions (734-649-1777). (they are not responsible for any inaccuracies) Here is some of the stuff I found out:
Types of Collectors
1. Flat Plate:
- cheaper but careful of ones with thin film plastic glazing
- takes more sun to heat up (greater water volume)
- collectors may not last as long
2. Evacuated Tube (coaxial)
- more expensive
- lower mass system so heats up quicker…better for MI winters
- double wall system recommended (vs. single wall)
- better longevity as a system
- maintenance easy (like changing out a light bulb)
Maintenance Costs (estimated):
- Check 6 months after install ( for leaks and such)
- Yearly checks on closed loop pressure and pressure differentials (Building Manager can do this)
- Change of Heat Transfer Fluid every 3 -5 years (Should be done by Professional )
- Replace Pump – 10 years
- Tank: 30 years (or longer) – less wear and tear than a directly heated tank.
Certification
The Solar Rating Certification Council certifies different type of solar heaters.
- OG 100 – Collector Certification
- OG 300 Complete System Certification
Certified Michigan Based Manufacturers of Solar Hot Water Systems
BTF Solar is one MI based manufacturer that comes recommended
Financial Incentives
Michigan – Residential Energy-Efficient Appliance Rebate Program (Heating and Water Heating)
Solar Calculators
Welcome to our Green Consulting Blog – Ask us a Question!
The Go Green Blog is a free green consulting blog offered by WARM Training Center. We welcome questions from you regarding energy efficiency, green building, and any other relevant questions you might have for us.
Ask away…email us at gogreen@warmtraining.org
Guest Blog on Powering the Nation
Aug 5th
Hey folks, just a heads up that Powering the Nation just posted a guest blog I did for them on the future of energy. Yep, that’s me on the list, right above John Kerry.
Here’s the list of guest editorials:
http://unc.news21.com/index.php/opinions.html
And here’s a direct link to my full article:
http://unc.news21.com/index.php/opinions/277-the-energy-challenge-act-today-shape-tomorrow.html